LONWORKS,Nodes,Lakewood,Instruments

LONWORKS Nodes Products From Lakewood Instruments


Lakewood Instruments provides relay and conductivity nodes for connection to Lakewood 2000 Series Controllers to allow microprocessor-based control of process streams using LONWORKS* technology. LONWORKS® enables control of several processes at once and allows convenient keypad programming.

* LONWORKS is a registered trademark of Echelon Corporation.

LONWORKS Nodes Products From Lakewood Instruments

NCKT Conductivity Node With Sensor and Tee
Technical specification on the NCKT, a LONWORKS* conductivity node in a NEMA 4X enclosure with a 4 electrode conductivity sensor and a quick release sensor tee.

NCON Conductivity Node
The Conductivity Node (NCON) is a LONWORKS* Technology-compatible node that works with several different temperature compensation inputs and with two-or four-electrode sensors allowing for various conductivity sensors to be used.

NDIG Digital Input Node
The digital input node (NDIG) is a LONWORKS® Technology-compatible node that uses twisted pair communications to monitor any dry contact input.

NpH PH/ORP Node
The pH/ORP Node (NpH) is a LONWORKS® Technology-compatible node that uses twisted pair communications. The NpH can be used to monitor pH or ORP.

NRLY Relay Node
NRLY is a node which may be added to Lakewood Instruments 2000 Series Controllers. The relays can be activated on direct or reverse setpoint, water meter inputs or by a percent on-time setting.

N420I 4-20 mA Input Node
The 4-20 mA input node (N420I) is a LONWORKS® Technology-compatible node that uses twisted pair communications.